Measuring Instruments Supplier Malaysia, Soldering Irons and Switches Supplier Kuala Lumpur, KL, Audio Equipments Supplier Singapore ~ Pacific Radio (M) Sdn Bhd

Category: FLUKE

Features

The feature-packed 424D distance meter measures up to any situation.

Measures up to 100 m (330 ft)
Higher accuracy: ±1 mm (0.04 in)
4-line display shows you even more data at a glance
Inclination sensor assists with height tracking, leveling, and indirect horizontal distance measurements when line-of-sight is blocked
Corner angle feature allows you to determine the angle of a corner
Compass provides a "heading" for your distance measurements
Stores 20 complete displays for quick recall
Backlight for improved visibility
Tripod mode allows mounting for long-distance measurements
Full Pythagoras function for height measurements
Audible keypad feedback
Stake Out feature for marking defined lengths such as wooden frames
Automated End-piece Correction detects the bracket position and auto-adjusts the reference point
Minimum/Maximum function
Enhanced environmental protection: IP54-rated (dust and water spray resistant)
Improved battery life of 5000 measurements with auto shut-off

Like all the new Fluke Laser Distance Meters, the 424D offers instant, one-button measurements of the distance between two objects with:

Reduction of estimation errors, saving both time and money
The most advanced 2-laser technology for distance measurement
Instant measurement with one-button operation
Easy addition and subtraction function
Quick calculation of area (square footage) and volume
Easy addition and subtraction of measurements
Minimum/maximum function
Improved battery life from automatic shut-off feature
Pythagoras calculation for determining distance indirectly from two other measurements
Pouch with Fluke logo
Three-year warranty

Improved visibility with backlit screen
Ability to measure up to 80 m (260 ft) for 419D, 100 m (330 ft) for 424D
Tripod mode allows you to mount to a tripod for measuring long distances
Stake out function
Enhanced Pythagoras calculation for determining distance indirectly from three other measurements
Audible keypad feedback
Storage of the last twenty measurements for quick recall of distance
Strong environmental protection with IP54 (water spray and dust proof) sealing

Inclination sensor for taking measurements in hard to reach areas
Compass provides a "heading" for distance measurement
Automated end-piece correction — when measuring from an edge or corner, a built-in sensor detects the position of this bracket and automatically changes the reference point

Model	414D	419D	424D
Distance Measurement
Typical Measuring Tolerance [1]	±2.0 mm [3]	±1.0 mm [3]
Maximum Measuring Tolerance [2]	±3.0 mm [3]	±2.0 mm [3]
Range at Leica Target Plate GZM26	50 m / 165 ft	80 m / 260 ft	100 m / 330 ft
Typical Range [1]	40 m / 130 ft	80 m / 260 ft	80 m / 260 ft
Range at Unfavorable Conditions [4]	35 m / 115 ft	60 m / 195 ft	60 m / 195 ft
Smallest Unit Displayed	1 mm / 1/16 in	6 / 30 / 60 mm (10 / 50 / 100 m)
Tilt Measurement
Measuring Tolerance to Laser Beam [5]	No	No	±0.2°
Range	No	No	360°
General
Laser Class	2
Laser Type	635 nm, <1 mW
Protection Class	IP40	IP54
Automatic Laser Off	After 90 seconds
Automatic Power Off	After 180 seconds
Battery Life	Up to 3,000 measurements	Up to 5,000 measurements
Dimensions (H × W × L)	116 × 53 × 33 mm	127 × 56 × 33 mm	127 × 56 × 33 mm
Weight (with batteries)	113 g	153 g	158 g
Temperature Range (Storage/Operation)	-25°C to +70°C / 0°C to +40°C	-25°C to +70°C / -10°C to +50°C
Calibration Cycle	Not applicable	Not applicable	Tilt and Compass
Maximum Altitude	3000 m	3000 m	3000 m
Maximum Relative Humidity	85% at -7°C to +50°C (20°F to 120°F)
Safety	IEC 61010-1:2001, EN60825-1:2007 (Class II)
EMC	EN 55022:2010, EN 61000-4-3:2010, EN 61000-4-8:2010

View more about Fluke 424D Laser Distance Meter on main site