Details
Basic Features
- Measurement of RCD trip time
- Measurement of trip out current
- Remote Test function for hands-free operation
- Voltage Measurement in stand-by mode
- Auto-detection of Contact voltage for user safety
- Dust- and Water-proof construction (IP54)
- Backlight for dim environments
Measurement of RCD trip time - Measurement of trip out current
| Range | ×5 | ×1 | ×1/2 | AUTO RAMP (mA) |
| Rated Voltage | 100V±10% 200V -10%～+32% 400V±10% 50/60Hz |
|||
| Test Current | 15/30/50/100mA | 15/30/50/100/200/500mA | 15/30/50/100/200/500mA | |
| Measuring Range | Testing time 0ms～200ms |
Testing time 0ms～2000ms |
Testing time 0ms～2000ms |
40% - 110% of IΔn (increments of 5%) Testing time 300ms × 15 steps |
| Accuracy (Trip Time) | 1%rdg±3dgt | 1%rdg±3dgt | 1%rdg±3dgt | Test Current at each step -4%～+4% |
| Accuracy (Trip Out Current) | +2%～+8%dgt | +2%～+8%dgt | -8%～-2%dgt | |
Voltage Measurement
| Measuring Range | 80V～450V 50/60Hz |
| Accuracy | 2%rdg±4dgt |
General Specifications
| Applicable Standards | IEC 61010-1 Pollution degree 2 CAT III 300V / CAT II 400V IEC 61010-031 IEC 61557-1, 6 IEC 60529 (IP54) |
| Display | 1999 counts (3 1/2 digits), Large LCD |
| Operating Temp. & Humidity | 0°C - 40°C, RH 85% (no condensation) |
| Storage Temp. & Humidity | -20°C - 60°C, RH 85% (no condensation) |
| Insulation Resistance | 50MΩ or more / 1000V (between electrical circuit and enclosure) |
| Sleep Function | (1) Auto Sleep mode after 3 minutes of inactivity (current consumption 75μA). Does not operate during voltage measurement. To exit, turn OFF and ON again. (2) Backlight turns off automatically after 1 minute. |
| Power Source | DC 12V / Size AA battery R6 (SUM-3) × 8 pcs. |
| Dimensions | 167(L) × 186(W) × 89(D) mm |
| Weight | Approx. 965g (including batteries) |
| Possible Number of Measurements | 1200 times or more (every 30 sec at ×1/2 Range, IΔn=100mA) |
| Included Accessories | 7128A (Test leads) 7129A (Test lead with alligator clip) 8017 (Long pin) × 2 Cord case, 9121 (Shoulder strap), Instruction manual, Size AA battery R6 (SUM-3) × 8 pcs. |
(*) Only RCD type G (without trip time-delay) can be tested in Auto Ramp mode.
Type S (time-delay) cannot be tested.
View more about Kyoritsu 5410 RCD Testers on main site